24336A61B-F3DA-4D72-8EF9-95E66224FF77A6A01773-E977-418A-B578-B922158D1E64888FE197-816A-48DE-82B7-E6CABD2E3950AKM 44612/44622/44617/44618 Direct mount thermometers41
Available with up to 2 contacts (switches) to control cooling and trigger alarms.
Contacts can be set to trigger anywhere within the range of 10-120°C.
Optional SCADA (Pt100) output allows for remote monitoring and data acquisition.
Designed and tested to ensure quality and performance
Maximum temperature pointer shows highest value reached since last reset.
Provides accuracy within ±2°C.
Measurement accuracy within ±2°C.
Switching accuracy within ±3°C.
Corrosion resistant materials and design ensure long life
Can be used to simulate winding temperature{\rtf1\ansi\ansicpg1252\deff0\deflang7177{\fonttbl{\f0\fnil\fcharset0 MS Sans Serif;}} {\colortbl ;\red8\green0\blue0;} \viewkind4\uc1\pard\cf1\f0\fs17\par }Transformer Equipment\Qualitrol\ThermometersC529646B-BD06-4C3E-B8E7-2B7B96544900187116AllbroEC-ZA-0-30--0000187135--2-1.pngEC-ZA-0-30--0000187135--2-1.png(PATHUPLOAD)\__upload\Allbro\Catalogue\imagesEC-ZA-0-30--0000187135--2-1.png1
2FB952A38-DD1B-4093-B9F2-7CB676500BB9A6A01773-E977-418A-B578-B922158D1E64888FE197-816A-48DE-82B7-E6CABD2E3950OTIWTI Remote mount thermometer (AKM)42
Up to 6 fully independent switches flexible enough for most control and alarm schemes.
Each switch can be specified by switch type, hysteresis range, and set point, without limitation of sequential set points.
Standard switch rated for up to 15 Amps AC and up to 10 Amp DC, switches also available for higher VDC (magnetic blow out, M.B.O.), and switches for milliamp loads.
Various analog outputs also available (mA, Pt 100, and Cu 10)
Each switch can be specified with adjustable hysteresis (5 to 25°C).
